Aluminum aluminum profile - 8mm

For the connection and fastening of channel board in 8 mm, we offer in 60 mm width.

Features of the aluminum aluminum profile

The aluminum-aluminum profile, consisting of an aluminum top and bottom profile with retracted rubber strips, is suitable for channel sheets. The aluminum profile is break-proof and resistant and ensures that your plastic sheets are held firmly in place. The rubber strips exert the necessary pressure on the sheets and prevent dirt and water from entering the profiles.

Accessories

• End piece in anthracite / brown / aluminum gloss / white: Beautifies the appearance at the ends (finishes the profiles) and prevents the sheets from sliding off your frame.
• Stainless steel screws (5.5 x 35): With EPDM washer
• Stainless steel screws (4.8 x 38): For all profile systems
• Stainless steel screws (4.8 x 16): For fastening the end pieces
• Finishing profiles (optional): Optical embellishment of the profile; covers the screw heads
• Wall profile (optional): Closure between channel plates and wall
• Rubber strips and support rubber

Information on processing and installation

The aluminum profiles can be cut to size with a jigsaw with a metal saw blade and pre-drilled with an 8-mm drill bit. For an even result, you can use the drill groove as a guide; this also prevents the drill from slipping. With appropriate screws, you can screw the profiles 2-3 cm into the rafter. For a professional installation, mount the aluminum-aluminum profiles in the direction of the roof pitch.

Additional information

• Consider your substructure when purchasing the profiles, as aluminum-aluminum profiles are mounted on a wooden substructure and aluminum-rubber profiles are suitable for warped substructures.
• Store the aluminum profiles and their accessories protected from moisture and sunlight to prevent corrosion and deformation due to heat accumulation and water flooding.