Aluminum PVC profile - 10mm

For the connection and fastening of channel board in 10 mm, we offer in 60 mm width.

Features of the aluminum PVC profile

The aluminum-PVC profile system is available in a complete set as a middle and edge profile. The set includes an aluminum bottom profile with retracted rubber strips and a PVC top profile. The complete profile system is break-resistant and weatherproof. The middle profiles are recommended for connecting two plastic sheets. The edge profiles are needed to connect the sheets at the ends of your structure. The top profiles are PVC and ideal if you want a rounded finish to match a white substructure.

Accessories

• End piece in white with rounding
• Stainless steel screws (4.8 x 38): For all profile systems
• Stainless steel screws (4.8 x 16): For fastening the end pieces
• Finishing profiles (optional): Optical embellishment of the profile; covers the screw heads
• Wall profile (optional): Closure between channel plates and wall
• Rub strips and support rubber

Information on processing and installation

The aluminum profiles can be cut to size with a jigsaw with a metal saw blade and pre-drilled with an 8-mm drill bit. For an even result, you can use the drill groove as a guide; this also prevents the drill from slipping. With appropriate screws, you can screw the profiles 2-3 cm into the rafter. For a professional installation, mount the aluminum-aluminum profiles in the direction of the roof pitch.

Additional information

• Consider your substructure when purchasing the profiles, as aluminum-aluminum profiles are mounted on a wooden substructure and aluminum-rubber profiles are suitable for warped substructures.
• Store the aluminum profiles and their accessories protected from moisture and sunlight to prevent corrosion and deformation due to heat accumulation and water flooding.